FAQ | The Feedback Wizard doesn't seem to be doing anything on my TouchMix-30 Pro. The channel fader isn't moving.

Learn troubleshooting steps to get your Feedback Wizard working with the TouchMix-30 Pro, including why the channel fader may not be moving.

Updated at May 10th, 2023

Your engagement helps us create the content you need. Click here to review this article.

Table of Contents


This can happen if the environment is too quiet or if the only noise in the space is low frequency noise such as air-handling noise. 

The solution is to apply a little noise using the noise control located on the lower left corner of the Anti-Feedback Wizard screen. One other possibility is that the inputs are muted or that noise gates are preventing input signal from reaching the mixer output.