Contact TechDocs
If you are not finding the results you need and still have questions, submit a request using the form below and our Tech Docs team will get right on it. Our goal is to provide the content you need!
Sound Advice
Quick audio lessons
- Sound Advice | How Feedback is Created
- Sound Advice | Proper microphone placement to avoid feedback
- Sound Advice | How to eliminate feedback with EQ
- Sound Advice | Microphone techniques to avoid feedback
- Sound Advice | Proper gain structure to avoid feedback
- Sound Advice | Setting up a stage: Running power
- Sound Advice | Calculating power consumption of your gear
- Sound Advice | Setting up a stage: Subwoofer placement
- Sound Advice | Setting up a stage: Main left and right loudspeaker placement
- Sound Advice | Setting up a stage: Stage monitors
- Sound Advice | Setting up a stage: Connect you PA to power
- Sound Advice | Setting up a stage: Mixing console placement
- Sound Advice | Setting up a stage: Running audio cables for you PA
- Sound Advice | How to adjust input gain on your mixer
- Sound Advice | How to avoid comb filtering part 4: Multiple loudspeakers
- Sound Advice | How to avoid comb filtering part 3: Reflections
- Sound Advice | Cable management
- Sound Advice | How to avoid comb filtering part 2: What is comb filtering?
- Sound Advice | How to avoid comb filtering part 1: Destructive phase interference
- Sound Advice | Loudspeaker placement part 1: Low frequency build-up
- Sound Advice | Loudspeaker placement part 2: Low frequency cancellation
- Sound Advice | Loudspeaker placement part 3: Low frequency resonance
- Sound Advice | Loudspeaker placement part 4: Room size and acoustics
- Sound Advice | Loudspeaker placement part 5: Reflective surfaces
- Sound Advice | Loudspeaker placement part 6: Distributed loudspeakers
- Sound Advice | Mixing monitors using a wireless tablet
- Sound Advice | Creating a "festival" mixing scene
- Sound Advice | How to ring out a room (mains and monitors) to eliminate feedback
- Sound Advice | Using delay loudspeakers in a venue
- Sound Advice | Unbalanced cables
- Sound Advice | Balanced cables
- Sound Advice | Unbalanced stereo cables
- Sound Advice | Phantom Power
- Sound Advice | Loudspeaker placement part 7: Using delayed loudspeakers
- Sound Advice | Broadcast mixing tips: The importance of microphones
- Sound Advice | Using a dedicated monitor mixer
- Sound Advice | Controlling stage volume - More is less
- Sound Advice | Controlling stage volume - Mic the guitar amps
- Sound Advice | Controlling stage volume - Minimize drums in monitors
- Sound Advice | EQ Fundamentals - Low Pass Filters
- Sound Advice | Parametric EQ Explained
- Sound Advice | Shelf EQ Filters Explained
- Sound Advice | What is frequency?
- Sound Advice | What is a graphic EQ?
- Sound Advice | 5-Step EQ Workflow Overview
- Sound Advice | Signal to Noise Ratio
- Sound Advice | EQ Tips - The boost, sweep and cut method
- Sound Advice | EQ Tips - Frequency masking and how to avoid it
- Sound Advice | Volume channel placement
- Sound Advice | EQ tips for vocals
- Sound Advice | Compression Explained
- Sound Advice | Limiters Explained
- Sound Advice | How to multitrack record multiple bands using TouchMix
- Sound Advice | How to set up mono in-ear mix
- Sound Advice | How to run a smooth soundcheck with TouchMix
Popular Articles
- Error | Protect Mode 4 on K.2 Series loudspeakers
- Troubleshooting | K.2 Speaker Displaying Firmware 9.1.1.x
- How To | Removal and Installation of K.2 Amp Module for Service
- Troubleshooting | TouchMix DAW Utility not installing/opening in MacOS
- How To | Setup the TouchMix TM-30 DAW Connection for MAC.
- Troubleshooting | K.2 Loudspeaker Does Not Pass Audio
- How To | K.2 Firmware Installation > macOS
- FAQ | Do the RMXa Series amplifiers have Universal Power Supplies?
- Troubleshooting | K.2 Loudspeaker Does Not Turn On