FAQ | What are the resistance specs for the K/KW series remote gain pot?

Learn what the resistance specs are for the K/KW series remote gain pot.

Updated at May 10th, 2023

Your engagement helps us create the content you need. Click here to review this article.

Table of Contents


The input of the remote gain (green phoenix connector, parallel wiring) is intended for a 10k ohm linear taper variable resistor.

  • The wiper/middle pin is for control of the gain, the ccw/left pin is the voltage positive, and the cw/right pin is the ground.
  • Only one positive voltage pin needs to be wired to one speaker if the control resister is controlling more than one speaker.