FAQ | What drives are supported for recording on TouchMix Series Mixers?
Discover the supported drives for recording on TouchMix Series Mixers to ensure compatibility and optimal performance.
Answer
As there are far too many hard-drives available to test them all, the specifications below should ensure stability with TouchMix mixers.
- FAT32 format is required (must be formatted on the TouchMix for proper operation).
- Power draw 500 mA or less.
- 2 TB or less capacity.
- USB 2.0 compatible.
- Higher speed drives (>7200 RPM) tend to work best.
- Some higher speed drives don’t do their best when powered from the USB port and may require an external power supply.
- Solid State Drives also work well.
- USB thumb-drives may work for recording a small number of channels but are not recommended although users report good results with better quality USB 3.0 thumb drives.
The following link contains some Qualified Hard Drives previously tested with the TouchMix.
Note
As manufacturer specifications for drives change over time, we cannot guarantee continued support on previously qualified hardware.