FAQ | Why are some channels on the TouchMix-30 Pro being displayed without the faders?

Find out why some channels might display on the TouchMix-30 Pro without their corresponding faders, and learn how to resolve this issue.

Updated at May 9th, 2023

Answer


There are two explanations: 

  • In the case of a wireless device this may be because the mixer's Remote Control Access settings for the device are not set to allow the device to control the selected mix. 
  • The second possible reason is that the missing faders are, by design not available for the mix being viewed. For example, the Aux Output Faders 9-16 are not shown on Aux Mixes 1-8 because these outputs cannot be mixed onto Auxes 1-8.