Training | L Class Active Loudspeakers
Discover how to optimize the performance of your L Class Active Loudspeakers through training sessions. Master the features and capabilities of your loudspeakers to enhance your audio experience.
Information
QSC has several training videos available for L Class Active Loudspeakers. Please see the info below to get started on your product.
L Class Training Series
L Class Training Series 1: Introduction
Summary
In this introduction you'll get an overview of the L Class Active Line Array system with brief explanations of the product highlights and features includeing Rapid Deploy, AWARE, LEAF Waveguide, ALP (acoustic linear phase design) and SysNav.
Details of all of these features are discussed in the following L Class Training Series videos.
L Class Training Series 2: Back Panal Navigation
Summary
In this video, we dive into the Rear User Interface (RUI) menu featured on the LA108 and LA112 active loudspeakers. You'll learn to navigate the simple interface using the onboard controls and get familiar with the entire menu system.
L Class Training Series 3: RapidDeploy
Summary
In this video, we explain and demonstrate the unique and innovative RapidDeploy rigging system featured on the LA108 and LA112 loudspeakers.
L Class Training Series 4: Array Frame Deployment
Summary
In this video, we cover the deployment of an L Class line array in a flown configuration using the L Class Array Frame. Learn the proper procedures for setting up, adjusting and tearing down an array.
L Class Training Series 5: Ground Stack Deployment
Summary
In this section, we'll cover the ground stack deployment of an L Class line array using the Array Frame over the LS118 subwoofer, and more!
L Class Training Series 6: Pole Mounting Deployment
Summary
In this video, we show you how to deploy a smaller number of LA108 and LA112 loudspeakers on a loudspeaker stand or on an extension pole above a subwoofer.
L Class Training Series 7: AWARE™ ™
Summary
In this video, we dive into the intelligent, onboard QSC AWARE™ system that communicates essential setup information to the user via any loudspeakers's Rear User Interface (RUI) or QSC SysNav™ App.
SysNav App Training
SysNav App Training: Connecting to the System
Summary
In the first of the System Navigator training series, we start out by going through the process of downloading and installing the application on on iPad or Windows PC before proceed to demonstrate making a successful connection to an L Class system.
SysNav App Training: Control and Monitoring of an L Class System
Summary
In this video we demonstrate how to control an L Class system using the "Control" module within SysNav as well as how to access the various monitoring screens for real time system telemetry.
SysNav App Training: Using the AIM module
Summary
In this video we walk though the AIM module within the System Navigator application. The AIM module offers pre-deployment visualization of the acoustic coverage of an L Class system. This video discusses how to add venue parameters within the software and populate an L Class line array system to be modeled.
L Class LA108/LA112 Tote Bag Pad Installation Demo
Summary
A quick little instructional video demonstrating how to assemble and place the pads inside an L Class line array tote bag.
To learn more about L Class, go to https://www.qsc.com/L-Class.
Click here to become an L Class Expert!
For more lessons and videos, see our QSC YouTube page.